Modular Buildings
History
The
Modular Building Program was created in 1993 and has been in effect
since July 1, 1993. The program was established in conjunction with
various modular building manufacturers, third party inspection
agencies, local and state code enforcement officials. The goal of the
program is to assure modular construction is built in accordance with
the codes and standards adopted at the state level. Compliance with the
program is witnessed by the application of New Hampshire modular labels
on each unit.
Modular manufacturers are approved by the State
Fire Marshal’s Office. The manufacturer must also have an approved
third party inspection agency. The third party inspection agency has
architects and engineers on staff to review and approve construction
plans, as well as inspectors who perform in process inspections of each
unit. The State Fire Marshal’s Office audits the third party inspection
agencies and manufacturers on an on-going basis in an attempt to assure
product quality and code compliance.
These procedures are in
place to take the inspection burden from the local officials and end
users. The presence of New Hampshire modular building labels on the
units certify the units meet the codes and standards adopted at the
state level.
Modular Building Installation Standards
Any modular building manufactured prior to July 24, 1992 must meet current State building codes.
Any modular building manufactured after July 24, 1992 must be certified by the State (NH RSA 205-C:3)
Permit Application Process for Modular Buildings:
- In addition to the permit Application process the following are required:
- Two sets of NH Engineered stamped plans with third party review approval stamp
- Two sets of NH Engineered stamped foundation plans
- Energy code compliance documentation
- Notice
to local enforcement agency is required at least 72 hours prior to the
date of setting the building per Saf-C 3311.02
- Any
construction done on site must meet current NH State building codes,
City codes, and State Statutes (ie: decks, garage, accessory
construction).
- Blower Door test will be required. (Residential Use)
- Follow NH Rules for Modular Building and Building components as outlined per Saf-C 3300.
Manufactured Housing Links:
NH RSA 205-C
Saf-C 3300 Rules for modular buildings